China factory High-Speed 500mm Wire Twisting Machine high quality

Item Description

Substantial-velocity 500mm wire twisting machine

Application:

apply to twisting of 7 a lot more strands copper wires or enamelled wire.

Higher velocity stranding device, also identified as wire bunching machine, can be widely utilized for stranding all types of comfortable / challenging conductor wires (copper wire, enamelled wire, tinned wire, copper-clad metal, copper-clad aluminum, and so on.) and electronic wires, these kinds of as energy line, telephone line, audio line, video clip line, car line, network line, and so on.

[technological feature]:

1. The highest pace of spindle is 3000rpm.

two. Computerized pressure management: in the course of strand winding, the winding rigidity needs to increase continually when the winding is obtained from the bottom of the reel. This purpose can routinely observe and change the winding rigidity Make the winding tension of the total reel uniform, and the machine can change the rigidity CZPT halting.

3. The main motor is lubricated by oil and cooled by natural circulation, which properly prolongs the provider existence of the primary shaft bearing.

The wire passing program adopts a new framework. The wire passes directly from the major shaft guide wheel to the bow belt, minus the scratch and strand leaping brought on by the failure of the corner guide wheel on the aluminum plate.

four. 3 tightening units are established in the device to guarantee the roundness of the conductor soon after stranding and reduce the reduction of insulating resources

five. The total device is driven by synchronous belt. There is no lubrication position in the machine. The device is held cleanse and the stranded wire is free of charge of oil stain. It is appropriate for conductor stranding of a variety of wire kinds with large surface area cleanliness demands.

six. Only a single consider-off pulley demands to be changed to change the stranding length, and only the reversing rod requirements to be pulled to change the stranding route, so as to work merely, so as to decrease the mistake fee and operate depth of the operator· The bearings of the whole device are properly-known brand names in Japan, and the bow belt is produced of new materials with great flexibility, so as to keep away from inventory leaping induced by vibration throughout large-speed operation. The frequency converter, PLC, magnetic particle clutch, electromagnetic brake and hydraulic jack are all imported effectively-recognized brands, so as to decrease the failure charge and upkeep cost.


Technique requirements:

Device modle DL300 DL500 DL630
Twisting section(m) .035-.937 .073-2.five .8-6.seven
Diameter of single wire(mm) .05-.28 .08-.45 .16-.sixty three
Max velocity(RPM) 3000 3000 2000
Electricity(KW) 3.seven 5.5 7.5
Gross weigh(KW)t 30 150 550

 

 

Energetic Pulley: The “input” pulley in a twin-pulley system. The shaft of this pulley is pushed by one thing like a motor, a crank, or probably an additional pulley in larger techniques. This pulley controls the movement of the belt.

China factory High-Speed 500mm Wire Twisting Machine     high quality