China Standard Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv pulley assembly

Product Description

Certifications

 

Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox AGV
PLANETX planetary reduce
AGV  reducer advantage:

AGV reducer is also a kind of planetary reducer. By changing the output mode of the planetary mechanism, we can convert the standard shaft output to the internal gear ring output, so as to achieve the purpose of outer ring rotation. The successful development of this product meets the requirements of similar products with the highest transmission efficiency value and the lowest axial length value. It successfully solves the shortcomings of AGV logistics trolley in limiting the axial size of deceleration installation and the large loss of transmission efficiency of ordinary reducer.
The minimum single-stage reduction of AGV reducer can be 2, the maximum speed ratio generally does not exceed 9, the common reduction ratio is 3, 4, 6, 9, and the number of reducer stages generally does not exceed 2, and the speed ratio does not exceed 50; Due to the adoption of planetary transmission mechanism, the rotary accuracy can be comparable to that of standard planets, up to 3 minutes of arc. The operating temperature can be between – 40 ºC and 120 ºC.
The transmission efficiency is high, the axial dimension is short, the structure is compact, and the AGV structure is simplified.
  company-HangZhou-PLT-Transmission-Equipment-Co-Ltd-.html

Reduction ratio  Rated output torque Rated input speed Maximum radial bearing capacity Maximum axial bearing capacity Full load efficiency Operating temperature Lubrication method Degree of protection Hub stress mode
15:1 120Nm 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
21:1 80Nm 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
30:1 60N 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90° Long term effect IP54 Double support
40:1  60N 3000rpm 6800N(150rpm) 850N(150rpm) 90%  -25°~+90°  Long term effect IP54 Double support
Customizable reduction ratio 3:1     4:1     6:1      9:1      15:1       21:1       28:1        30:1       40:1        42:1        60:1

HangZhou CHINAMFG Transmission Equipnenit Co,Ltd
is based on the global industrial automation field. it is
saies of planetary reducers, hollow rotary platforrres, 
a manufacturer specializing in R&D, production and
  and special reducers. It belongs to “National High-tech 
 
Enterprise”. The headquarters and production center are located in HangZhou City,ZheJiang Province, which is known as the “world factory”, and there are service centers and transit warehouses in ZheJiang . ZheJiang ,HangZhou and other places.
The company’s core team members have more than 10 years of experience in the transmission industry and gear processing industry, and are good at solving a variety of internal and external gears and processing solutions. The company has summed up a complete set of “transmission quality management system” to ensure the relative accuracy of each component after combination,and provide high pass rate and high efficiency guarantee for the whole machine to leave the factory. We use advanced computer software for design and demonstration,combined with years of experience in mechanical transmission and motion
control, to provide global motion and control solutions. Our products have the characteristics of high precision, large bearing torque, long life, low noise, stable operation, strong versatility and maintenance-free Quality is the foundation of enterprise survival. We provide the market with stable and high-quality products and provide more optimized automation
solutions. Always take “user demand” as the business purpose of the enterprise, take “scientific and
technological innovation” as the foundation of the company’s development, and implement the Iso
quality management system operation into all aspects of the company.
Our products are widely used in aerospace,CNC machine tools, cutting and welding equipment,textile printing and dyeing machinery packaging machinery, food machinerymedical machineryships,radardata communication systems,robots,robotic arms, composite materials equipmentprecision testing
Instruments, testing machines,plastic machinery, glass machinery,coal mining machinery,lifting machinery, metallurgical machinery,construction machinery and other fields.
The process of our pursuit of success is the process of continuous sublimation of our relationship with you. The success of the company is inseparable from the long-term support and help of many customers and friends. Facing the future, we will serve you more. HangZhou CHINAMFG Transmission Equipment Co.,Ltd. will go hand in hand with you to create brilliant!

Qualification certificate
Authoritative certification, guarantee of Xinnai
The company has long adhered to the business policy of “technical progress as the guide, quality improvement as the main line, fully optimize the overall quality of the enterprise, and then meet the needs of the society for development”.

Q: How to get a quick quote
A: Please provide the following information when contacting us

  1. Motor brand
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand
 

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Match Machine: Spinning Equipment
Material: Metal
Processing Level: Precision Finishing
Customization:
Available

|

Customized Request

spinning pulley

How do spinning pulleys impact the performance of fitness and exercise equipment?

Spinning pulleys play a significant role in enhancing the performance of fitness and exercise equipment. They contribute to the smooth operation, functionality, and effectiveness of various exercise machines. Here’s how spinning pulleys impact the performance of fitness and exercise equipment:

1. Resistance Adjustment:

In many fitness and exercise equipment, spinning pulleys are utilized to adjust the level of resistance. By incorporating pulleys of different sizes or changing the position of the pulley along the cable or resistance mechanism, users can modify the intensity of their workouts. This allows individuals to tailor their exercise routines to their fitness levels, goals, and preferences.

2. Smooth and Controlled Movement:

Spinning pulleys, combined with cables or belts, enable smooth and controlled movement in fitness equipment. They provide a stable and consistent motion, ensuring that users can perform exercises with proper form and technique. The smooth movement facilitated by spinning pulleys minimizes the risk of jerky or jarring motions, reducing the likelihood of injuries.

3. Multiple Exercise Options:

Fitness equipment often incorporates spinning pulleys to offer a wide range of exercise options. By utilizing pulleys with different cable attachment points and adjusting the cable paths, equipment manufacturers can provide users with versatile workout possibilities. Spinning pulleys enable exercises targeting different muscle groups, allowing users to perform various strength training or conditioning movements.

4. Cable and Handle Adjustments:

Spinning pulleys are instrumental in adjusting the length and position of cables or handles in fitness equipment. This adjustability allows users of different heights, body sizes, or exercise preferences to find the most comfortable and biomechanically suitable settings. Users can modify the range of motion and exercise angles to optimize their workouts.

5. Functional Training and Weight Stacks:

In weight training machines, spinning pulleys are used in conjunction with weight stacks to provide resistance. The weight stacks are connected to the pulleys, and the user pulls or pushes against the resistance. Spinning pulleys ensure smooth and even distribution of the weight load, enhancing the user’s ability to perform functional movements and isolate specific muscle groups.

6. Durability and Reliability:

High-quality spinning pulleys are crucial for the durability and reliability of fitness and exercise equipment. Pulleys designed to withstand the repetitive stresses and forces exerted during workouts ensure long-term performance and minimize the risk of component failures. Reliable spinning pulleys contribute to the overall safety and longevity of the equipment.

7. Maintenance Considerations:

Regular maintenance procedures, such as inspecting pulley systems, lubricating pulley bearings, and ensuring proper belt tension, are necessary to maintain the performance and functionality of fitness equipment with spinning pulleys. These maintenance practices help prevent premature wear, ensure smooth operation, and extend the lifespan of the equipment.

In summary, spinning pulleys significantly impact the performance of fitness and exercise equipment by enabling resistance adjustment, providing smooth and controlled movement, offering multiple exercise options, allowing cable and handle adjustments, facilitating functional training with weight stacks, ensuring durability and reliability, and requiring proper maintenance. These pulleys enhance the overall user experience, promote effective workouts, and contribute to achieving fitness goals in a safe and efficient manner.

spinning pulley

What are some real-world examples of spinning pulley applications in various industries?

Spinning pulleys find widespread applications in various industries, contributing to the smooth operation of different machines and systems. Here are some real-world examples of spinning pulley applications in various industries:

1. Manufacturing and Industrial Machinery:

– Conveyor Systems: Spinning pulleys are extensively used in conveyor systems across industries such as manufacturing, logistics, and mining. They help drive and guide conveyor belts, enabling the efficient movement of materials or products.

– Printing Presses: In the printing industry, spinning pulleys are crucial components in printing presses. They facilitate the movement of paper or printing substrates, ensuring precise registration and consistent printing quality.

– Machine Tools: Spinning pulleys are found in various machine tools like lathes, milling machines, and drill presses. They enable speed control and power transmission, allowing for different machining operations.

2. Automotive Industry:

– Engine Systems: Spinning pulleys are used in automotive engines to drive various components such as the alternator, water pump, power steering pump, and air conditioning compressor.

– Timing Systems: Timing pulleys and belts are employed in the engine’s timing system to synchronize the rotation of the camshaft and crankshaft, ensuring precise valve timing.

3. Textile Industry:

– Spinning and Weaving Machines: Spinning pulleys are integral to spinning and weaving machines in the textile industry. They facilitate the movement of fibers or yarns, ensuring proper tension and controlled feeding.

– Dyeing and Printing Machines: Spinning pulleys play a role in dyeing and printing machines by guiding fabrics through the dyeing or printing processes, ensuring accurate color application and pattern alignment.

4. Construction and Heavy Equipment:

– Cranes and Hoists: Rope pulleys, also known as sheaves, are used in cranes and hoists to provide mechanical advantage and facilitate lifting or load-bearing operations.

– Excavators and Loaders: Spinning pulleys are employed in construction equipment like excavators and loaders to transfer power and enable the movement of buckets or other attachments.

5. Agricultural Machinery:

– Harvesting Equipment: Spinning pulleys are used in agricultural machinery such as combine harvesters to drive components like the cutting platform or conveyor belts.

– Irrigation Systems: Pulleys are utilized in irrigation systems to drive pumps or control the movement of irrigation pipes or tubes.

6. HVAC Systems:

– Air Handling Units: Spinning pulleys are used in air handling units to drive fans and facilitate air circulation and ventilation.

– Cooling Towers: Pulleys are employed in cooling towers to drive the fan blades, promoting efficient cooling of water or other fluids.

These are just a few examples of spinning pulley applications in various industries. Spinning pulleys play a vital role in many other sectors, including mining, food processing, packaging, woodworking, and more. The versatility and functionality of spinning pulleys make them essential components in numerous machines and systems across different industries.

spinning pulley

How does a spinning pulley assist in the efficient transmission of power?

A spinning pulley plays a vital role in the efficient transmission of power in mechanical systems. Here’s how it accomplishes this:

1. Power Transfer:

A spinning pulley is connected to a power source, typically an electric motor or an engine, through a belt, rope, or chain. As the power source rotates, it drives the spinning pulley, transferring rotational energy to it. The spinning pulley acts as a mechanical intermediary, converting the rotational motion of the power source into the rotational motion of the pulley itself.

2. Speed and Torque Conversion:

Spinning pulleys can be designed with different diameters or sizes. By varying the diameter of the spinning pulley, the speed and torque can be adjusted. A larger pulley diameter allows for higher torque output but lower rotational speed, while a smaller pulley diameter results in higher rotational speed but lower torque. This flexibility in speed and torque conversion enables the spinning pulley to match the requirements of the driven components.

3. Belt Tension and Grip:

The spinning pulley is in direct contact with the belt, rope, or chain, creating friction and ensuring a firm grip. This grip is crucial for efficient power transmission. The spinning pulley, along with other pulleys in the system, helps maintain proper belt tension, ensuring optimal power transfer without slippage or loss of energy. Adequate tension also prevents premature wear and prolongs the life of the power transmission components.

4. Directional Change and Redirection:

In many applications, spinning pulleys are used to change the direction of power transmission. By redirecting the path of the belt, rope, or chain, a spinning pulley enables power to be transmitted around corners, across different levels, or to components located in different positions. This versatility allows for efficient power transmission in complex mechanical systems with various spatial arrangements.

5. Load Distribution:

Spinning pulleys help distribute the load across the power transmission system. As the power is transmitted from the spinning pulley to the driven components, the load is shared among multiple pulleys and transmission elements. This load distribution prevents excessive stress on individual components, reducing the risk of failure or damage and ensuring efficient power transmission throughout the system.

6. Maintenance and Adjustability:

Spinning pulleys are relatively easy to maintain and adjust. They can be quickly inspected, lubricated, and replaced if necessary. Additionally, the size and configuration of spinning pulleys can be modified to accommodate changes in power requirements or system design, providing flexibility and adaptability to evolving needs.

By facilitating power transfer, converting speed and torque, maintaining belt tension and grip, enabling directional changes, distributing load, and allowing for maintenance and adjustability, spinning pulleys contribute to the efficient transmission of power in a wide range of mechanical systems and industries.

China Standard Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv   pulley assembly	China Standard Drive Motion Flow Wheel Pulley Large Range Speed Ratio Large Payload Low Backlash Reducer Hub Planetary Gearbox Agv   pulley assembly
editor by CX