China wholesaler High-Quality Wire 500mm Pair Twisting Machine high quality

Item Description

Higher-quality wire 500mm pair twisting equipment

Application:

use to twisting of 7 a lot more strands copper wires or enamelled wire.

Higher velocity stranding equipment, also acknowledged as wire bunching equipment, can be commonly utilised for stranding all sorts of gentle / challenging conductor wires (copper wire, enamelled wire, tinned wire, copper-clad metal, copper-clad aluminum, and many others.) and digital wires, such as energy line, phone line, audio line, video clip line, auto line, network line, and many others.

[technological function]:

one. The highest velocity of spindle is 3000rpm.

2. Automated stress control: in the course of strand winding, the winding pressure requirements to enhance constantly when the winding is obtained from the base of the reel. This function can automatically keep track of and change the winding pressure Make the winding pressure of the total reel uniform, and the device can change the pressure CZPT halting.

3. The primary engine is lubricated by oil and cooled by all-natural circulation, which properly prolongs the service lifestyle of the primary shaft bearing.

The wire passing system adopts a new construction. The wire passes right from the major shaft manual wheel to the bow belt, minus the scratch and strand leaping caused by the failure of the corner guide wheel on the aluminum plate.

four. 3 tightening products are established in the equipment to ensure the roundness of the conductor soon after stranding and minimize the loss of insulating components

five. The whole machine is pushed by synchronous belt. There is no lubrication level in the device. The equipment is retained cleanse and the stranded wire is free of charge of oil stain. It is appropriate for conductor stranding of a variety of wire sorts with large surface cleanliness requirements.

6. Only a single consider-off pulley demands to be replaced to change the stranding distance, and only the reversing rod wants to be pulled to alter the stranding route, so as to function basically, so as to minimize the mistake rate and operate depth of the operator· The bearings of the complete machine are properly-acknowledged brands in Japan, and the bow belt is manufactured of new supplies with excellent versatility, so as to avoid inventory jumping brought on by vibration throughout higher-velocity operation. The frequency converter, PLC, magnetic particle clutch, electromagnetic brake and hydraulic jack are all imported nicely-recognized brand names, so as to decrease the failure charge and maintenance expense.


Technique specs:

Machine modle DL300 DL500 DL630
Twisting section(m) .035-.937 .073-2.5 .8-6.seven
Diameter of single wire(mm) .05-.28 .08-.forty five .16-.63
Max pace(RPM) 3000 3000 2000
Electrical power(KW) 3.7 five.5 seven.5
Gross weigh(KW)t 30 a hundred and fifty 550

 

 

Redirect your dual climbing lines with ISC’s dual redirect pulley. This is the simplest way to redirect double traces, with swinging aspect panels and facet-by-facet aluminum pulleys. With the wiggling cheek design, this complements the redirect set up properly. Change on the pulley, faucet the rope on both legs to hook up it and redirect it to the very best line angle for much more efficiency. The sloped layout of the higher panel retains the rope pulley and working appropriately. Manufactured of lightweight aluminum, this pulley is beautiful and compact, so it is not going to just take up as well significantly place on your belt.

China wholesaler High-Quality Wire 500mm Pair Twisting Machine     high quality